Monday, June 25, 2012

Enable Virtualization Technology (VT) in BIOS for installing other operating system on your host OS.

Desktop virtualization software give ability to install and run multiple Operating Systems on your desktop or laptop computer in virtual environment without disturbing the host OS. You can have Windows XP, Linux OS and even Windows 95 on your latest Windows 7 laptop.
You must have a Hardware Virtualization Technology (VT) computer.
Make sure your computer support Hardware Virtualization Technology.

Virtualization Technology in BIOS

This post explains how to enable Virtualization Technology (VT) in motherboard BIOS. To run some operating systems, virtualization software and virtual machines hardware virtualization should be enabled. Mostly, operating systems which not required virtualization technology run normally when virtualization technology is enabled, but for the operating systems required this technology, it must be enabled.
All latest processors and motherboards support virtualization technology, check your motherboard vendor about this support and how to enable or disable VT in BIOS. Operating system detects the hardware virtualization technology once it’s enabled on your motherboard

Where to Find Virtualization Technology (VT) in BIOS?

This setting is found under ‘Advanced Chipset settings’ in AWARD BIOS. It will be different for each motherboard. Check your mother board manual.



How to Confirm Virtualization Technology is Enabled or Disabled?

1) If your processor is Intel, then you can use this free utility to confirm the result which operating system is sensing.
Download Intel tool to confirm virtualization technology
The result of this utility brings a screen as shown below,
Enable Virtualization Technology (VT)
2) For AMD Processors download the below utility.
3) Microsoft Tool to check hardware virtualization Technology ( VT)
Download the free tool from Microsoft here.
Installation not required, when execute the EXE file, following result appears.
Enable Virtualization Technology (VT)
The above result shown is other computer which is not having hardware enabled.
After you change the settings to disable or enable, it’s recommended to shutdown the computer for minimum 10 seconds and restart the machine (Cold Restart) to take effects. If your motherboard is latest one, it detects this change doe’s cold restart. Whenever I change this VT setting on my motherboard, it delays the next restart automatically.

source

No comments:

Post a Comment